This chapter introduces several more Coq tactics that, together, allow us to prove many more theorems about the functional programs we are writing.

The apply Tactic

We often encounter situations where the goal to be proved is exactly the same as some hypothesis in the context or some previously proved lemma.

The apply tactic also works with conditional hypotheses and lemmas: if the statement being applied is an implication, then the premises of this implication will be added to the list of subgoals needing to be proved.

You may find it instructive to experiment with this proof and see if there is a way to complete it using just rewrite instead of apply. Typically, when we use apply H, the statement H will begin with a ∀ binding some universal variables. When Coq matches the current goal against the conclusion of H, it will try to find appropriate values for these variables. For example, when we do apply eq2 in the following proof, the universal variable q in eq2 gets instantiated with n and r gets instantiated with m.

Exercise: 2 stars, optional (silly_ex)

Complete the following proof without using simpl.

☐ To use the apply tactic, the (conclusion of the) fact being applied must match the goal exactly — for example, apply will not work if the left and right sides of the equality are swapped.

In this case we can use the symmetry tactic, which switches the left and right sides of an equality in the goal.

Exercise: 3 stars (apply_exercise1)

Hint: you can use apply with previously defined lemmas, not just hypotheses in the context. Remember that SearchAbout is your friend.

☐

Exercise: 1 star, optional (apply_rewrite)

Briefly explain the difference between the tactics apply and rewrite. Are there situations where both can usefully be applied? (* FILL IN HERE *)
☐

The apply ... with ... Tactic

The following silly example uses two rewrites in a row to get from [a,b] to [e,f].

Since this is a common pattern, we might abstract it out as a lemma recording once and for all the fact that equality is transitive.

Now, we should be able to use trans_eq to prove the above example. However, to do this we need a slight refinement of the apply tactic.

Actually, we usually don't have to include the name m in the with clause; Coq is often smart enough to figure out which instantiation we're giving. We could instead write: apply trans_eq with [c,d].

Exercise: 3 stars, optional (apply_with_exercise)

☐

The inversion tactic

Recall the definition of natural numbers: It is clear from this definition that every number has one of two forms: either it is the constructor O or it is built by applying the constructor S to another number. But there is more here than meets the eye: implicit in the definition (and in our informal understanding of how datatype declarations work in other programming languages) are two other facts:

• The constructor S is injective. That is, the only way we can have S n = S m is if n = m.
• The constructors O and S are disjoint. That is, O is not equal to S n for any n.

Similar principles apply to all inductively defined types: all constructors are injective, and the values built from distinct constructors are never equal. For lists, the cons constructor is injective and nil is different from every non-empty list. For booleans, true and false are unequal. (Since neither true nor false take any arguments, their injectivity is not an issue.) Coq provides a tactic called inversion that allows us to exploit these principles in proofs. The inversion tactic is used like this. Suppose H is a hypothesis in the context (or a previously proven lemma) of the form for some constructors c and d and arguments a1 ... an and b1 ... bm. Then inversion H instructs Coq to "invert" this equality to extract the information it contains about these terms:

• If c and d are the same constructor, then we know, by the injectivity of this constructor, that a1 = b1, a2 = b2, etc.; inversion H adds these facts to the context, and tries to use them to rewrite the goal.
• If c and d are different constructors, then the hypothesis H is contradictory. That is, a false assumption has crept into the context, and this means that any goal whatsoever is provable! In this case, inversion H marks the current goal as completed and pops it off the goal stack.

The inversion tactic is probably easier to understand by seeing it in action than from general descriptions like the above. Below you will find example theorems that demonstrate the use of inversion and exercises to test your understanding.

As a convenience, the inversion tactic can also destruct equalities between complex values, binding multiple variables as it goes.

Exercise: 1 star (sillyex1)

☐

Exercise: 1 star (sillyex2)

☐ While the injectivity of constructors allows us to reason ∀ (n m : nat), S n = S m → n = m, the reverse direction of the implication is an instance of a more general fact about constructors and functions, which we will often find useful:

Here's another illustration of inversion. This is a slightly roundabout way of stating a fact that we have already proved above. The extra equalities force us to do a little more equational reasoning and exercise some of the tactics we've seen recently.

Exercise: 2 stars, optional (practice)

A couple more nontrivial but not-too-complicated proofs to work together in class, or for you to work as exercises. They may involve applying lemmas from earlier lectures or homeworks.

☐

Using Tactics on Hypotheses

By default, most tactics work on the goal formula and leave the context unchanged. However, most tactics also have a variant that performs a similar operation on a statement in the context. For example, the tactic simpl in H performs simplification in the hypothesis named H in the context.

Similarly, the tactic apply L in H matches some conditional statement L (of the form L1 → L2, say) against a hypothesis H in the context. However, unlike ordinary apply (which rewrites a goal matching L2 into a subgoal L1), apply L in H matches H against L1 and, if successful, replaces it with L2. In other words, apply L in H gives us a form of "forward reasoning" — from L1 → L2 and a hypothesis matching L1, it gives us a hypothesis matching L2. By contrast, apply L is "backward reasoning" — it says that if we know L1→L2 and we are trying to prove L2, it suffices to prove L1. Here is a variant of a proof from above, using forward reasoning throughout instead of backward reasoning.

Forward reasoning starts from what is given (premises, previously proven theorems) and iteratively draws conclusions from them until the goal is reached. Backward reasoning starts from the goal, and iteratively reasons about what would imply the goal, until premises or previously proven theorems are reached. If you've seen informal proofs before (for example, in a math or computer science class), they probably used forward reasoning. In general, Coq tends to favor backward reasoning, but in some situations the forward style can be easier to use or to think about.

Exercise: 3 stars (plus_n_n_injective)

Practice using "in" variants in this exercise.

☐

Varying the Induction Hypothesis

Sometimes it is important to control the exact form of the induction hypothesis when carrying out inductive proofs in Coq. In particular, we need to be careful about which of the assumptions we move (using intros) from the goal to the context before invoking the induction tactic. For example, suppose we want to show that the double function is injective — i.e., that it always maps different arguments to different results: The way we start this proof is a little bit delicate: if we begin it with all is well. But if we begin it with we get stuck in the middle of the inductive case...

What went wrong? The problem is that, at the point we invoke the induction hypothesis, we have already introduced m into the context — intuitively, we have told Coq, "Let's consider some particular n and m..." and we now have to prove that, if double n = double m for this particular n and m, then n = m. The next tactic, induction n says to Coq: We are going to show the goal by induction on n. That is, we are going to prove that the proposition

• P n = "if double n = double m, then n = m"

holds for all n by showing

• P O
  (i.e., "if double O = double m then O = m")
• P n → P (S n)
  (i.e., "if double n = double m then n = m" implies "if double (S n) = double m then S n = m").

If we look closely at the second statement, it is saying something rather strange: it says that, for a particular m, if we know

• "if double n = double m then n = m"

then we can prove

• "if double (S n) = double m then S n = m".

To see why this is strange, let's think of a particular m — say, 5. The statement is then saying that, if we know

• Q = "if double n = 10 then n = 5"

then we can prove

• R = "if double (S n) = 10 then S n = 5".

But knowing Q doesn't give us any help with proving R! (If we tried to prove R from Q, we would say something like "Suppose double (S n) = 10..." but then we'd be stuck: knowing that double (S n) is 10 tells us nothing about whether double n is 10, so Q is useless at this point.) To summarize: Trying to carry out this proof by induction on n when m is already in the context doesn't work because we are trying to prove a relation involving every n but just a single m. The good proof of double_injective leaves m in the goal statement at the point where the induction tactic is invoked on n:

What this teaches us is that we need to be careful about using induction to try to prove something too specific: If we're proving a property of n and m by induction on n, we may need to leave m generic. The proof of this theorem has to be treated similarly:

Exercise: 2 stars (beq_nat_true)

☐

Exercise: 2 stars, advanced (beq_nat_true_informal)

Give a careful informal proof of beq_nat_true, being as explicit as possible about quantifiers.

☐ The strategy of doing fewer intros before an induction doesn't always work directly; sometimes a little rearrangement of quantified variables is needed. Suppose, for example, that we wanted to prove double_injective by induction on m instead of n.

The problem is that, to do induction on m, we must first introduce n. (If we simply say induction m without introducing anything first, Coq will automatically introduce n for us!) What can we do about this? One possibility is to rewrite the statement of the lemma so that m is quantified before n. This will work, but it's not nice: We don't want to have to mangle the statements of lemmas to fit the needs of a particular strategy for proving them — we want to state them in the most clear and natural way. What we can do instead is to first introduce all the quantified variables and then re-generalize one or more of them, taking them out of the context and putting them back at the beginning of the goal. The generalize dependent tactic does this.

Let's look at an informal proof of this theorem. Note that the proposition we prove by induction leaves n quantified, corresponding to the use of generalize dependent in our formal proof. Theorem: For any nats n and m, if double n = double m, then n = m. Proof: Let m be a nat. We prove by induction on m that, for any n, if double n = double m then n = m.

• First, suppose m = 0, and suppose n is a number such that double n = double m. We must show that n = 0.
  Since m = 0, by the definition of double we have double n = 0. There are two cases to consider for n. If n = 0 we are done, since this is what we wanted to show. Otherwise, if n = S n' for some n', we derive a contradiction: by the definition of double we would have double n = S (S (double n')), but this contradicts the assumption that double n = 0.
• Otherwise, suppose m = S m' and that n is again a number such that double n = double m. We must show that n = S m', with the induction hypothesis that for every number s, if double s = double m' then s = m'.
  By the fact that m = S m' and the definition of double, we have double n = S (S (double m')). There are two cases to consider for n.
  If n = 0, then by definition double n = 0, a contradiction. Thus, we may assume that n = S n' for some n', and again by the definition of double we have S (S (double n')) = S (S (double m')), which implies by inversion that double n' = double m'.
  Instantiating the induction hypothesis with n' thus allows us to conclude that n' = m', and it follows immediately that S n' = S m'. Since S n' = n and S m' = m, this is just what we wanted to show. ☐

Exercise: 3 stars (gen_dep_practice)

Prove this by induction on l.

☐

Exercise: 3 stars, advanced, optional (index_after_last_informal)

Write an informal proof corresponding to your Coq proof of index_after_last: Theorem: For all sets X, lists l : list X, and numbers n, if length l = n then index n l = None. Proof: (* FILL IN HERE *)
☐

Exercise: 3 stars, optional (gen_dep_practice_more)

Prove this by induction on l.

☐

Exercise: 3 stars, optional (app_length_cons)

Prove this by induction on l1, without using app_length.

☐

Exercise: 4 stars, optional (app_length_twice)

Prove this by induction on l, without using app_length.

☐

Using destruct on Compound Expressions

We have seen many examples where the destruct tactic is used to perform case analysis of the value of some variable. But sometimes we need to reason by cases on the result of some expression. We can also do this with destruct. Here are some examples:

After unfolding sillyfun in the above proof, we find that we are stuck on if (beq_nat n 3) then ... else .... Well, either n is equal to 3 or it isn't, so we use destruct (beq_nat n 3) to let us reason about the two cases. In general, the destruct tactic can be used to perform case analysis of the results of arbitrary computations. If e is an expression whose type is some inductively defined type T, then, for each constructor c of T, destruct e generates a subgoal in which all occurrences of e (in the goal and in the context) are replaced by c.

Exercise: 1 star (override_shadow)

☐

Exercise: 3 stars, optional (combine_split)

Complete the proof below

☐ Sometimes, doing a destruct on a compound expression (a non-variable) will erase information we need to complete a proof. For example, suppose we define a function sillyfun1 like this:

And suppose that we want to convince Coq of the rather obvious observation that sillyfun1 n yields true only when n is odd. By analogy with the proofs we did with sillyfun above, it is natural to start the proof like this:

We get stuck at this point because the context does not contain enough information to prove the goal! The problem is that the substitution peformed by destruct is too brutal — it threw away every occurrence of beq_nat n 3, but we need to keep some memory of this expression and how it was destructed, because we need to be able to reason that since, in this branch of the case analysis, beq_nat n 3 = true, it must be that n = 3, from which it follows that n is odd. What we would really like is to substitute away all existing occurences of beq_nat n 3, but at the same time add an equation to the context that records which case we are in. The eqn: qualifier allows us to introduce such an equation (with whatever name we choose).

Exercise: 2 stars (destruct_eqn_practice)

☐

Exercise: 2 stars (override_same)

☐

Review

We've now seen a bunch of Coq's fundamental tactics. We'll introduce a few more as we go along through the coming lectures, and later in the course we'll introduce some more powerful automation tactics that make Coq do more of the low-level work in many cases. But basically we've got what we need to get work done. Here are the ones we've seen:

• intros: move hypotheses/variables from goal to context
• reflexivity: finish the proof (when the goal looks like e = e)
• apply: prove goal using a hypothesis, lemma, or constructor
• apply... in H: apply a hypothesis, lemma, or constructor to a hypothesis in the context (forward reasoning)
• apply... with...: explicitly specify values for variables that cannot be determined by pattern matching
• simpl: simplify computations in the goal
• simpl in H: ... or a hypothesis
• rewrite: use an equality hypothesis (or lemma) to rewrite the goal
• rewrite ... in H: ... or a hypothesis
• symmetry: changes a goal of the form t=u into u=t
• symmetry in H: changes a hypothesis of the form t=u into u=t
• unfold: replace a defined constant by its right-hand side in the goal
• unfold... in H: ... or a hypothesis
• destruct... as...: case analysis on values of inductively defined types
• destruct... eqn:...: specify the name of an equation to be added to the context, recording the result of the case analysis
• induction... as...: induction on values of inductively defined types
• inversion: reason by injectivity and distinctness of constructors
• assert (e) as H: introduce a "local lemma" e and call it H
• generalize dependent x: move the variable x (and anything else that depends on it) from the context back to an explicit hypothesis in the goal formula

Additional Exercises

Exercise: 3 stars (beq_nat_sym)

☐

Exercise: 3 stars, advanced, optional (beq_nat_sym_informal)

Give an informal proof of this lemma that corresponds to your formal proof above: Theorem: For any nats n m, beq_nat n m = beq_nat m n. Proof: (* FILL IN HERE *)
☐

Exercise: 3 stars, optional (beq_nat_trans)

☐

Exercise: 3 stars, advanced (split_combine)

We have just proven that for all lists of pairs, combine is the inverse of split. How would you formalize the statement that split is the inverse of combine? Complete the definition of split_combine_statement below with a property that states that split is the inverse of combine. Then, prove that the property holds. (Be sure to leave your induction hypothesis general by not doing intros on more things than necessary. Hint: what property do you need of l1 and l2 for split combine l1 l2 = (l1,l2) to be true?)

☐

Exercise: 3 stars (override_permute)

☐

Exercise: 3 stars, advanced (filter_exercise)

This one is a bit challenging. Pay attention to the form of your IH.

☐

Exercise: 4 stars, advanced (forall_exists_challenge)

Define two recursive Fixpoints, forallb and existsb. The first checks whether every element in a list satisfies a given predicate: The second checks whether there exists an element in the list that satisfies a given predicate: Next, define a nonrecursive version of existsb — call it existsb' — using forallb and negb. Prove that existsb' and existsb have the same behavior.

☐